We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Neurotrac Myo Plus 2
- New and Improved touch-screen with full colour display. The new user friendly interface makes it a self-explanatory unit with the interactive learning on the go, including electrode placement, running EMG graph , EMG biofeedback Games and Templates as well as many other helpful tools.
- Pre-set programmes for Incontinence treatment, Sports and muscular development, neuromuscular Rehabilitation.
- Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).
- 2 channel EMG (Biofeedback) combined with 2 channels of NMES (stimulation).
- 2 channel ETS (EMG triggered stimulation) with stimulation on 2 channels.
- Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
- Multilingual LCD screen and voice prompts for Biofeedback.
- Manual and Automatic threshold control.
- EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
- Stand alone device or used in conjunction with established multilingual software.
- Up to 10 meters of wireless (Bluetooth) connection for NeuroTrac Software.
- For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
- Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.
Supplied with 4 electrodes (50x50mm)
Product comes with a 2 Year Warranty
€836.40
€680.00
Availability:
Sold Out
SKU
150-233
EMG (Biofeedback)
-Dual channel EMG
-EMG Range: 0.2 to 2000 μV RMS (continuous)
-Sensitivity: 0.l μV RMS
-Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
-Selectable Bandpass filter – 3db Bandwidth,
-a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
-b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
-Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
-Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
-Work / Rest periods: 2-99 seconds
-Number of Trials: 2-99
STIM (Neuromuscular Stimulation)
-Dual channel Stimulator
-Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to ------Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
-Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
-Waveform: Symmetrical, rectangular,
-Bi-phasic with net zero DC current
-Pulse width selection: 50-450 μS (2% accuracy)
-Pulse rate selection: 2-100 Hz (2% accuracy)
-Work / Rest periods: 2-99 seconds
-Time: 1 – 99 minutes
-Ramp up time: 0.1 – 9.9 seconds
-Preset and user programmable treatment Programs
-Automatic output shut off with detection of open electrode above 0.5 mA
-Battery: 4 x AA. Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA.
-Expected average battery set life [of standard 800 mAh, alkaline]:
a. MyoPlus2: 12-16 hours in STIM, 25 hours in EMG mode.
b. MyoPlus4: 8-16 hours in STIM, 25 hours in EMG mode.
-Environmental Conditions for use: +5 to +40 degrees Centigrade. 15-93% Humidity.
-Environmental conditions for storage & transport: -25 to +70 degrees Centigrade. 15-93% Humidity.
-Physical dimensions: Length 150 mm, Width 89 mm, Depth 35 mm.
-Weight: MyoPlus2 device: 0.16 Kg (without batteries).