We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
NEUROTRAC PELVITONE UNIT
- Advanced multi-phase programmes where treatment is split into time phases with different stimulation parameters;
- Stronger symmetrical stimulation with the reduced Pulse Width : 50 – 330 μS.
- Three Custom programmes plus 11 Preset Continence programmes.
- Lock mode function to measure the home compliance (mA and time used)
Neurotrac Pelvitone is supplied without a probe.
See below for probe purchase options.
Click on the image to download detail specification
In stock
SKU
150- 325
-Dual channel: individually isolated circuits.
-Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
-Type: Constant current, maximum output voltage 180 Volts +10 / -30 Volts
-Waveform: Symmetrical, rectangular bi-phasic with zero DC current.
-Selectable pulse width: 50 μS – 330 μS [2% accuracy].
-Pulse Rate selection: in the continuous mode 2 – 100 Hz [2% accuracy].
-Time duration of the treatment selectable: 1 minute to 90 minutes.
-Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
-Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
-Ramp up time 0.1 – 9.9 seconds.
-If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
Physical dimensions: 134 x 69 x 29.7 mm.
Weight: 0.18 KG with battery.
Environmental Conditions for use: +5 to +40 degrees Centigrade. 0-90% Humidity.
Environmental conditions for storage & transport: -25 to +70 degrees Centigrade. 0-90% Humidity